ESAT Physics: electric circuits
Electricity is the first area in the ESAT Physics specification and one of the most calculation-heavy. Most questions combine Ohm's law with the series and parallel rules and a power equation, and the numbers are chosen to work without a calculator.
Facts checked on . Always confirm with the official source before you book.
Part of ESAT Physics. Jump to the 2 worked questions.
What comes up
- Current, charge and time; potential difference and energy per unit charge.
- Resistance in series and in parallel, and how current splits between branches.
- Power: , and energy .
- Static charge, V-I graphs for a fixed resistor and a filament lamp, and ideal diodes.
Where the marks go
- Adding parallel resistances as if they were in series, or adding the reciprocals and forgetting to invert.
- Using the battery voltage across one resistor when it is shared.
- Assuming current stays the same when the supply changes. For a fixed resistor, resistance is what stays the same.
How it is scored
Each module has 27 questions in 40 minutes, one mark each, with nothing lost for a wrong answer. Each module gets its own score from 1.0 to 9.0, and UAT-UK publishes no raw-mark conversion table.
When you practise with us you get an estimate on the same 1.0 to 9.0 scale, with its margin of error. How we estimate a ESAT score explains what that estimate is based on and when not to trust it.
Worked questions
Try each one before opening the answer.
Show the answer and the working
The answer is C.
- Parallel pair: , so . (Or product over sum: .)
- Total resistance: .
- .
- Check: 3 V across the 2 Ω resistor, 3 V across the pair, so 1 A and 0.5 A in the branches. They add to 1.5 A.
Where the other options come from
- A. Treats all three resistors as in series: .
- B. That is the current in the resistor only.
- D. Adds the reciprocals and uses without inverting.
- E. Uses only the resistor.
Show the answer and the working
The answer is B.
- Resistance from the rating: .
- At : .
- Shortcut: at fixed resistance, so halving quarters the power: .
Where the other options come from
- A. Uses , which is the current, not the power.
- C. Keeps the current at 2 A, or assumes power is proportional to voltage. With fixed resistance, halving halves too.
- D. The rated power applies only at the rated voltage.
Want more? Unlimited ESAT electricity practice, with new numbers every time and the slip behind each wrong option.
Not sure which topics to work on first?
The free 20-minute diagnostic asks fourteen questions across Maths 1 and your two modules under test conditions, then sorts your topics into gaps, right-but-slow and solid. No account needed.
Sitting the ESAT on 4 to 8 January? The January Sprint turns that result into a day-by-day plan to your test date, with full timed mocks and an estimated score after each one. It is free for the January sitting: early access, no card, nothing to pay later.
Other ESAT Physics topics
- Kinematics · 2 worked questions
- Radioactivity · 2 worked questions
Sitting the ESAT or TMUA in 2027?
Free mock papers and booking reminders by email. Nothing else.
- New ESAT and TMUA mock papers and free practice, the day they go live.
- A reminder before each booking deadline, so you don't miss your sitting.
- Up to one email a week until the January tests, then at most two a month. Unsubscribe in one click.